Home > Mechanical > Naganohara, Japanese Town To Test First Autonomous Amphibious Bus

Naganohara, Japanese Town To Test First Autonomous Amphibious Bus

No longer a rare sight, amphibious buses can now be found making a splash around the globe by providing tourists with a different view of local attractions. Even Naganohara, a small town in Gunma Prefecture, Japan, population 5,600, operates an amphibious tourist bus daily in and alongside the Yanba Dam nine months of the year.

And that’s the problem—the experience is less of a thrill year by year. So the town, an hour’s train journey northwest of Tokyo, hit on the idea of making the amphibious bus self-driving.

A consortium that includes the Japan Amphibious Vehicle Association, Saitama Institute of Technology (SIT), ITbook Holdings, ABIT Corporation, and the town of Naganohara will begin in December what is billed as the first such trials in the world of an autonomous amphibious bus. Supported primarily by the Nippon Foundation, the consortium has secured some 250 million yen ($2.4 million) to fund the project through to March next year, after which, progress will be evaluated, with further funding expected to be made available.

The amphibious bus, the property of the town, comprises a converted truck design combined with a ship’s bottom and carries 40 passengers. It uses the truck’s diesel engine on land and a separate ship engine to travel in the dam at 3.6 knots an hour.

SIT is developing the self-driving technologies for both land and water that are based on the open-source Autoware platform for autonomous cars, and on controllers for modified Joy Cars.

Joy Cars are joystick-controlled cars for disable people that have been retrofitted with actuators and a joystick controller system,” says Daishi Watabe, director, Center for Self-Driving Technologies at SIT, who is heading the Yanba Smart Mobility Project. “They are the development of an industry-SIT collaboration.”

READ ALSO  Amazon Uses Intrusive App To Monitor And Discipline Delivery Drivers

Tatsuma Okubo, a general manager at ITbook Holdings, is the project’s manager and describes the autonomous technology set-up as follows. A PC with the Autoware software installed takes in data from the various sensors including Lidar, cameras, and the Global Navigation Satellite System. The software uses a controller area network (CAN bus) to communicate the data to a vehicle motion controller that in turn controls two Joystick-controlled Joy System sub-control units: one for steering and one for accelerating and braking.

“Basically, our autonomous bus system substitutes voltage data from the joystick interface with voltage data from the Autoware electronic unit,” says Watabe. “We are developing two sets of remodeled Joy Car actuators for retrofitting in the Naganohara amphibious bus—one set for use on land, the other for water, which are remodeled land actuators.”

He says the autonomous control system will manage four major areas of control: vehicle water-in/water-out location-recognition; sensor-stabilization to counter ship rolling; self-localization techniques to manage changes in surrounding 3D views, given the water height in the dam can dramatically change; and a sonar-based obstacle-avoidance scheme. In addition, AI is also used to assist in obstacle detection, self-localization, and path planning.

When the dam was created, buildings and trees were left as they are.

“Given the height of the lake can change as much as 30 meters, we have to recognize underwater obstacles and driftwood to avoid any collisions,” says Watabe. “But because water permeability is low, cameras are not suitable. And Lidar doesn’t function well underwater. So we need to use sonar sensors for obstacle detection and path planning.”

READ ALSO  The Secret To Nvidia’s AI Success

What’s more, 3D views change according to the water level, while Lidar has no surrounding objects to reflect from when the bus is in the middle of the lake. “This means a simple scan-matching algorithm is not sufficient for self-localization,” explains Watabe. “So we’ll also use global navigation satellite data enhanced through real-time kinematic positioning and a gyro-based localization scheme.”

The biggest difficulty the project faces, according to Okubo, is the short construction period available, as they only have the off-season—December to March—this year and next to install and field test autonomous functionality.

Another challenge: Because winds and water flows can affect vehicle guidance, subtle handling of the vehicle is required when entering and exiting the water to ensure the underwater guardrails do not cause damage. Consequently, the group is developing a precise control system to govern the rudder and propulsion system.

“We’ll install and fine-tune the autonomous functionality during two off-season periods in 2020-21 and 2021-22,” says Watabe.  “Then the plan is to conduct field tests with the public in February and March 2022.”

Besides tourism, Okubo says the technology has a huge potential to “revolutionize logistics” to Japan’s remote islands, which are facing a survival crisis due to declining populations. As an example, he says only a single driver (or no driver once full automation is introduced) would be necessary during goods transshipments to such islands. This should reduce costs and enable more frequent operations.

Source, spectrum

Total Views: 134 ,

Leave a Reply

Your email address will not be published. Required fields are marked *